Competitive Cross Reference

Macromatic offers this cross-reference as a service to our customers to assist in the selection of replacement products. Every effort has been made to insure that these products are electrically and functionally equivalent to the Macromatic products except as noted. Macromatic cannot be responsible for errors of printing or corrections of data taken from published competitive data. It is the user's responsibility to insure the suitability of the substitution.

If you have any questions regarding these cross-references, or need to cross reference any product not listed, please contact Macromatic.

* If a part number is not found, select the "Series Name" from the right-hand drop down.

Or select competitor part series:

Macromatic Equivalent

Catalog Number: THS-1154A-32T

May not be exact product—for reference only.

Family: TIME DELAY RELAY
Function: SINGLE SHOT
Timing Range: 0.1 - 10 min
Control Voltage: 24-240V AC
Output: 1A NORMALLY OPEN (SOLID STATE)

SSAC Product

Competitor Part # TSS233 | Series: TSS

Differences:

SSAC unit has a time range of 2-180 seconds; Macromatic equivalent has a time range of 6-600 seconds; SSAC unit is 24VAC input voltage only; Macromatic unit is 24-240VAC

Files

Description Of Function Upon application of input voltage, the time delay relay is ready to accept a trigger. When the trigger is applied, the output is energized and the time delay (t) begins. During the time delay (t), the trigger is ignored. At the end of the time delay (t), the output is de-energized and the time delay relay is ready to accept another trigger.

Function Chart

Application Information

Voltage Tolerance: AC Operation: +10/-15% of nominal at 50/60 Hz
Load (Burden): Maximum of 1 VA for all voltages
Setting Accuracy: Maximum Setting (Adjustable): +5%, -0%; Minimum Setting (Adjustable): +0%, -50%; Fixed Time Delay: +2% or 50ms, whichever is greater
Repeat Accuracy (Constant Voltage & Temperature): +0.1% or + 0.04 seconds, whichever is greater
Reset Time: 40ms
Output Contacts: Solid State 1A Continuous, 10A Inrush @ 65^o C
Life: No predictable failure if used within operating parameters.
Leakage Current (OFF-State): <5 mA @ 240VAC
Minimum Load Current: 20mA
Effective Voltage Drop (ON-State): Maximum 3V @ 1A for all voltages
Temperature: -28^o to 65^oC (-18^o to 149^oF)
Approvals:

Dimensions - Inches (Millimeters)

Macromatic Distributor Stock Status

The THS-1154A-32T is not stocked by any Macromatic distributor. Please see below for any product substitutions.
Contact Macromatic for more information or how to purchase this product.

Contact Macromatic

Fill out this form to have Macromatic contact you about this product.

www.macromatic.com
800.238.7474

Product Specifications

THS-1154A-32T

Image may not be exact product—for reference only.

Competitor: SSAC

Competitor Part #: TSS233
Series: TSS
Macromatic Equivalent: THS-1154A-32T
Differences: SSAC unit has a time range of 2-180 seconds; Macromatic equivalent has a time range of 6-600 seconds; SSAC unit is 24VAC input voltage only; Macromatic unit is 24-240VAC

Family: TIME DELAY RELAY
Function: SINGLE SHOT
Timing Range: 0.1 - 10 min
Input Voltage: 24-240V AC
Output: 1A NORMALLY OPEN (SOLID STATE)

Description of function:

Upon application of input voltage, the time delay relay is ready to accept a trigger. When the trigger is applied, the output is energized and the time delay (t) begins. During the time delay (t), the trigger is ignored. At the end of the time delay (t), the output is de-energized and the time delay relay is ready to accept another trigger.

Function Chart:

Application Information

Voltage Tolerance: AC Operation: +10/-15% of nominal at 50/60 Hz
Load (Burden): Maximum of 1 VA for all voltages
Setting Accuracy: Maximum Setting (Adjustable): +5%, -0%; Minimum Setting (Adjustable): +0%, -50%; Fixed Time Delay: +2% or 50ms, whichever is greater
Repeat Accuracy (Constant Voltage & Temperature): +0.1% or + 0.04 seconds, whichever is greater
Reset Time: 40ms
Output Contacts: Solid State 1A Continuous, 10A Inrush @ 65^o C
Life: No predictable failure if used within operating parameters.
Leakage Current (OFF-State): <5 mA @ 240VAC
Minimum Load Current: 20mA
Effective Voltage Drop (ON-State): Maximum 3V @ 1A for all voltages
Temperature: -28^o to 65^oC (-18^o to 149^oF)
Approvals:

Dimensions

Inches (Millimeters)

Competitive Cross Reference

Approvals:

Product Specifications

THS-1154A-32T

Competitor: SSAC

Description of function:

Function Chart:

Application Information

Dimensions